# Technician II - Thermal Insulation at EDGE Group

EDGE Group is hiring a Technician II - Thermal Insulation in Abu Dhabi, United Arab Emirates. Level rates it Little AI ●○○○; you can [apply on EDGE Group](https://jobsbylevel.com/go/487f45e6-98bf-497b-b7fe-d93d0a23394a?utm_medium=ai-agent).

AI Level 1, AI centrality 38 out of 100. Abu Dhabi, Abu.

## Details

- Company: [EDGE Group](https://jobsbylevel.com/companies/edge-group)
- AI level: AI Level 1 (score 38 out of 100)
- Location: Abu Dhabi, Abu
- Posted: November 5, 2026
- Apply: https://jobsbylevel.com/go/487f45e6-98bf-497b-b7fe-d93d0a23394a?utm_medium=ai-agent
- Free CV review for this job: https://jobsbylevel.com/cv-review?job=technician-ii-thermal-insulation-at-edge-group-304b4f

## Description

ABOUT EDGE At EDGE bold ideas are engineered into technologies that protect, improve and save lives. Headquartered in the United Arab Emirates, EDGE is a leading advanced technology group working at the forefront of defence and emerging technologies. Spanning more than 35 specialised companies and multiple centres of excellence, we are purpose-built to move fast. Free from heavy legacy processes, we give our people the autonomy, accountability, and agility to bring breakthrough technologies from concept to reality. Based in Abu Dhabi, a globally connected hub at the crossroads of Europe, Asia, Africa, and the Middle East, EDGE is home to a truly multicultural community where bold ideas thrive, and the future is shaped. Together, we are shaping the future. ABOUT THE ROLE Apply, fabricate, and inspect thermal insulation systems across solid rocket motor ensuring full coverage, bond integrity, and dimensional conformance in accordance with approved process instructions and quality standards. RESPONSIBILITIES Apply rubber and elastomeric thermal insulation lay-ups to motor cases, end closures, and nozzles following approved ply sequences, coverage maps, and thickness requirements. Prepare component surfaces for insulation bonding: clean, abrade, mask, and apply primer and adhesive systems to metal, composite, and previously insulated substrates in accordance with process specifications. Cut, shape, and profile insulation stock using templates and patterns; form butt joints, scarfs, and overlaps to specification, eliminating voids, air pockets, and ply gaps throughout the lay-up. Operate curing equipment including ovens, autoclave, press-cure tooling, and vacuum bagging systems; execute approved cure cycles, monitor temperature and pressure parameters, and maintain accurate cure records Perform post-cure inspection of all insulation applications: conduct tap testing across bonded surfaces, measure cured thickness using calibrated gauges, and verify coverage completeness against inspection criteria; document all results on the manufacturing traveller. Fabricate rubber seals, end-cap inserts, gaskets, and bespoke insulation profiles to drawing requirements; assist in the trial fit and installation of pre-formed insulation parts into motor hardware Control the receipt, storage, and issue of uncured rubber and insulation materials in compliance with shelf-life limits, temperature storage requirements, and hazardous materials handling procedures Maintain the insulation work area, lay-up tooling, mandrels, and templates to a high standard of cleanliness, organisation, and readiness; report tooling damage or equipment faults to the supervisor without delay Comply with all HSE requirements for chemical handling environments including PPE for solvent and adhesive exposure, ventilation controls, and confined-space entry protocols where applicable; report hazards and near-misses immediately. Support continuous improvement by communicating lay-up difficulties, recurring bond defects, material inconsistencies, or tooling shortcomings to the supervisor or process engineer BASIC QUALIFICATIONS 1–3 years of experience in a manufacturing or fabrication environment. No prior insulation experience is required — full structured on-the-job training in thermal insulation lay-up, bonding, and curing processes will be provided. Secondary school certificate or vocational qualification in manufacturing, materials processing, or a related trade. PREFERRED QUALIFICATIONS Prior exposure to rubber processing, composite lay-up, adhesive bonding, or insulation work in aerospace, automotive, or industrial manufacturing. Trade certificate or technician diploma in polymer processing, composite fabrication, or a related manufacturing discipline. Basic chemical handling awareness certification. WHY CHOOSE EDGE Launched in November 2019, the UAE's EDGE is one of the world's leading advanced technology groups, established to develop agile, bold and disruptive solutions

The description is cut here. Read the full offer: https://jobsbylevel.com/jobs/technician-ii-thermal-insulation-at-edge-group-304b4f

Source: https://jobsbylevel.com/jobs/technician-ii-thermal-insulation-at-edge-group-304b4f

## Cite this page

Level. https://jobsbylevel.com/jobs/technician-ii-thermal-insulation-at-edge-group-304b4f.

Get job alerts: https://jobsbylevel.com/newsletter