Skip to content

SpaceX

Materials Engineer, Metals Joining (Starmind)

SpaceX is hiring a Materials Engineer, Metals Joining (Starmind). Level rates it ; you can apply on SpaceX.

Level's read on this job

  • On Level's scale, this role is Little AI ●○○○: aI is not part of the work.
  • Level lists 2,700+ other open roles at SpaceX.
  • The role was posted in the last few days.

AI in this role

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

MATERIALS ENGINEER, METALS JOINING (STARMIND)

SpaceX is leveraging its experience deploying and operating the world’s largest satellite constellation to develop Starmind, a new constellation of satellites capturing solar energy in space to power low-cost, high-performance AI compute for Earth. Realizing this vision demands highly reliable, high performance electrical compute hardware, solar power systems, thermal radiators, and more. These systems must operate in the extreme environment of space while delivering the connectivity, control, power distribution, and processing needed for orbital AI inference.

The Starmind team designs, builds, and operates the orbital compute fabric of the future, developing key in-house technologies from satellites’ flight computers and power systems to custom compute electronics, memory, and networking for on-orbit data centers. As a Materials Engineer you will serve as a technical owner for metal joining across Starmind hardware—developing, qualifying, and sustaining welding, brazing, soldering, and diffusion bonding processes for compute, power, and thermal management assemblies, including liquid-cooled cold plates, heat exchangers, thermal radiators, and hermetic electronics packaging. You will define joint designs and process specifications, establish the joint properties and acceptance criteria the design community relies on, and scale robust joining processes from prototype to high-rate production.

RESPONSIBILITIES:

  • Owned development, qualification, and troubleshooting of metal joining processes for Starmind satellite and ground hardware, including fusion welding (laser, electron beam, and tungsten inert gas), friction stir welding, resistance welding, vacuum and controlled-atmosphere brazing, soldering, and diffusion bonding
  • Supported material selection and manufacturing for metallic and joined assemblies such as liquid-cooled cold plates, heat exchangers, thermal radiators, structures, power electronics, and hermetic enclosures
  • Defined joint designs, filler metals, braze alloys, interlayers, and process parameters, and wrote the material and process specifications, process control plans, and acceptance criteria
  • Developed mechanical and physical properties of base metals and joints, including strength, fatigue, fracture toughness, and thermal and electrical conductivity, through thermal cycling and on-orbit environments
  • Set inspection and nondestructive evaluation methods, including computed tomography, radiography, ultrasonic C-scan, helium leak testing, and proof and burst testing, to verify joint integrity and leak-tightness
  • Investigated joint and material failures with fractography, metallography, and characterization testing, and drove corrective actions into design and production
  • Partnered with design, manufacturing, quality, and suppliers to design for joinability, qualify outsourced welded, brazed, forged, and cast hardware, and move processes from prototype to high-rate production

BASIC QUALIFICATIONS:

  • Bachelor’s degree in materials science, materials engineering, welding engineering, metallurgical engineering, or another science, technology, engineering, or mathematics field
  • Experience with metal-joining processes, including welding, brazing, soldering, and diffusion bonding, and with alloys commonly joined in aerospace and electronics hardware, such as aluminum, copper, stainless steel, nickel, and titanium

PREFERRED SKILLS AND EXPERIENCE:

  • Master’s degree or PhD in materials science, materials engineering, welding engineering, metallurgical engineering, or another science, technology, engineering, or mathematics field
  • First-principles understanding of joining metallurgy, including solidification, wetting and capillary flow, interdiffusion and intermetallic formation, heat-affected-zone behavior, and residual stress, and of how process variables drive joint performance
  • Experience with characterization techniques and equipment, including scanning electron microscopy and energy-dispersive spectroscopy, optical microscopy, hardness testing, mechanical property testing, and spectroscopy for composition or phase
  • Hands-on experience developing and qualifying welding, brazing (vacuum, furnace, or induction), and/or diffusion bonding processes, including joint design, fixturing, and parameter development
  • Experience joining aluminum, copper, and dissimilar metals for thermal-management hardware, such as cold plates and microchannel heat exchangers, or for electronics packaging
  • Familiarity with joining standards and specifications, such as American Welding Society D17.1 and C3.7, Aerospace Material Specification 2675, and American Society of Mechanical Engineers Section IX, and with their use in process qualification and procedure development
  • Experience applying design of experiments, statistical process control, and process capability analysis to joining processes in production
  • Demonstrated success in a rapidly growing, fast-paced, and highly competitive environment
  • Drive to execute in a scrappy, entrepreneurial environment with tight timelines and aggressive schedules
  • Hands-on experience in a high-volume manufacturing environment

ITAR REQUIREMENTS:

  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.

How we rate this

Materials Engineer, Metals Joining (Starmind) at SpaceX rates 34 out of 100 for how much of the daily work is AI. That makes it Little AI (AI Level 1 of 4). The level is about AI in the job, not seniority.

Classification

Little AI. AI is not part of the work.

  1. ●●●● Builds AI80 to 100
  2. ●●●○ Works on AI60 to 79
  3. ●●○○ Uses AI40 to 59
  4. ●○○○ Little AI0 to 39

Levels come from how often the tools, models and workflows of the role are named in the posting itself. Read the description and count the AI tools, models and workflows it names.

Get new software engineering jobs by email

One email a week, each job rated for how much AI is in the work. No recruiter spam, unsubscribe in one click.

Free.

Similar roles

Software Engineering roles that involve little AI, at other companies.

What kind of AI work fits you?

Answer 12 practical questions in about three minutes. Get a simple profile, the work it points to, and live roles to explore next.

Find my next step

More jobs at SpaceX

Related searches

Same AI level