Skip to content

EDGE Group

Senior Systems Engineer: Gas Turbines

EDGE Group is hiring a Senior Systems Engineer: Gas Turbines in Abu Dhabi, United Arab Emirates. Level rates it ; you can apply on EDGE Group.

Level's read on this job

  • Little AI ●○○○ is how Level rates this role: aI is not part of the work.
  • Level classifies it as a senior role.
  • Level lists 190 other open roles at EDGE Group.
  • The role was posted in the last few days.

AI in this role

ABOUT EDGE

At EDGE bold ideas are engineered into technologies that protect, improve and save lives.

Headquartered in the United Arab Emirates, EDGE is a leading advanced technology group working at the forefront of defence and emerging technologies. Spanning more than 35 specialised companies and multiple centres of excellence, we are purpose-built to move fast. Free from heavy legacy processes, we give our people the autonomy, accountability, and agility to bring breakthrough technologies from concept to reality.

Based in Abu Dhabi, a globally connected hub at the crossroads of Europe, Asia, Africa, and the Middle East, EDGE is home to a truly multicultural community where bold ideas thrive, and the future is shaped.

Together, we are shaping the future.

ABOUT THE ROLE

About ADASI

ADASI is the regional leader in autonomous systems and services, dedicated to offering holistic solutions – from the development and production of unmanned systems to joint mission analysis and equipment acquisition. We manufacture, operate, and maintain next-generation autonomous capabilities for air, land, and sea, operating in demanding environments. Headquartered in the UAE, we are committed to advancing the region’s technological edge in defense innovation.

The Systems Engineer – Gas Turbines is responsible for the requirements definition, stakeholder needs analysis, functional analysis, functional decomposition, functional allocation, architecture development, design synthesis, integration, verification, validation, certification support, and lifecycle management of gas turbine engine systems for military, aerospace, UAV, and aircraft platforms.

The role applies structured systems engineering processes to ensure gas turbine engine systems satisfy operational, performance, safety, reliability, maintainability, supportability, airworthiness, environmental, and certification requirements throughout the system lifecycle.

The position requires significant experience in gas turbine propulsion systems and the application of military, aerospace, airworthiness, and safety standards to develop robust, certifiable, and mission-capable propulsion system solutions.

RESPONSIBILITIES

1. Requirements Engineering & Systems Architecture

Capture, analyse, allocate, manage, and maintain stakeholder, customer, operational, safety, and regulatory requirements.
Conduct requirements decomposition, derivation, functional analysis, allocation, and traceability.
Develop functional, logical, physical, and behavioural architectures for gas turbine engine systems.
Define CONOPS, use cases, operational scenarios, system modes, and state models.
Perform design synthesis and establish system interfaces, specifications, architecture models, and technical baselines.
Maintain DDPs, VCRMs, and compliance matrices.

2. Propulsion System Design & Integration

Support the design, development, specification, integration, and lifecycle management of gas turbine engines and subsystems.
Conduct architecture trade studies and design assessments covering performance, thrust, shaft power, fuel efficiency, reliability, maintainability, safety, weight, environmental impact, availability, lifecycle cost, and supportability.
Support propulsion integration across UAV, fixed-wing, rotorcraft, and military aerospace platforms.
Define and manage interfaces between propulsion, airframe, avionics, software, electrical power, cooling, and mission systems

3. Engineering Analysis, Verification & Validation

Perform and review system-level functional, requirements compliance, engine performance, mission effectiveness, reliability, maintainability, availability, failure, thermal, interface, and risk analyses.
Support gas turbine cycle analysis, propulsion performance assessments, and engineering trade studies.
Develop verification and validation strategies, plans, and procedures, defining inspection, analysis, demonstration, and test methods.
Support and witness component, rig, engine ground, environmental qualification, system integration, aircraft ground, and flight testing.
Support functional, performance, endurance, vibration, shock, thermal, DO-160, and applicable EMI/EMC testing.

4. Safety, Airworthiness & Certification

Perform and support system safety activities in accordance with ARP4761 and MIL-STD-882E.
Derive, allocate, and verify propulsion safety requirements.
Conduct or support FHA, PSSA, SSA, FMEA, FMECA, FTA, CCA, and reliability and maintainability assessments.
Ensure aircraft-level hazard mitigation, fail-safe, fault-tolerant, contained-failure, and redundancy requirements are addressed.

5. Standards, Compliance & Technical Documentation

Ensure compliance with applicable systems engineering, aerospace, safety, and regulatory standards, including ISO/IEC/IEEE 15288, INCOSE, EIA-632, IEEE 1220, ARP4754A, ARP4761/A, MIL-STD-882E, MIL-HDBK-516C, DO-160, DO-178C, DO-254, AS9100D, and MIL-STD-810H
Generate and maintain stakeholder and system requirements specifications, architecture descriptions, functional and design reports, interface documentation, verification plans and procedures, test reports, safety assessments, compliance matrices, and certification evidence packages.
Participate in SRR, SFR, PDR, CDR, TRR, PRR, SVR, FCA, and PCA reviews.
Maintain configuration control, technical baselines, and end-to-end requirements traceability throughout the product lifecycle.

6. Supplier & Cross-Functional Coordination

Act as the technical focal point for gas turbine engine systems across multidisciplinary engineering teams.
Manage supplier and subcontractor technical performance, review requirements, architectures, analyses, qualification evidenc.
Participate in supplier audits, design reviews, technical interchange meetings, and acceptance activities.
Coordinate propulsion, controls, software, avionics, electrical, structures, manufacturing, safety, reliability, and certification teams.
Support Design for DFM, DFA, DFI, and DFMA.

BASIC QUALIFICATIONS

Education

Required

Bachelor's Degree in:

• Aerospace Engineering

• Mechanical Engineering

• Propulsion Engineering

• Aeronautical Engineering

• Systems Engineering

• Equivalent engineering discipline

Preferred

Master's Degree in:

• Aerospace Engineering

• Propulsion Engineering

• Mechanical Engineering

• Systems Engineering

• Related engineering discipline

Required

• Minimum 10 years of aerospace, propulsion, defence, or aviation industry experience.

• Minimum 5 years of direct systems engineering experience supporting gas turbine engine or propulsion system development programmes.

• Demonstrated experience in:

o Requirements engineering

o Functional analysis

o Functional allocation

o Systems architecture development

o Design synthesis

o Verification and validation

o System integration

o Certification support

• Experience with safety-critical aerospace systems.

• Experience working within structured systems engineering lifecycles and gated development programmes.

• Experience supporting airworthiness, qualification, verification, validation, or certification activities.

Preferred

Experience with:

• Military gas turbine engines

• UAV propulsion systems

• Fixed-wing aircraft propulsion systems

• Rotorcraft propulsion systems

• Turboshaft engines

• Turbofan engines

• Turbojet engines

• Turboprop engines

• FADEC-controlled propulsion systems

• Aircraft propulsion integration programmes

PREFERRED QUALIFICATIONS

Preferred Certifications

• INCOSE ASEP, CSEP, or ESEP.

• Model-Based Systems Engineering (MBSE) certification.

• Systems Safety Engineering training.

• Reliability Engineering certification.

• AS9100D Quality Management Systems training.

• PMP or equivalent project management certification.

• Military or civil airworthiness/certification training.

• Gas turbine OEM propulsion systems training.

WHY CHOOSE EDGE

CANDIDATE PRIVACY & EQUAL OPPORTUNITY STATEMENT

How we rate this

Senior Systems Engineer: Gas Turbines at EDGE Group rates 37 out of 100 for how much of the daily work is AI. That makes it Little AI (AI Level 1 of 4). The level is about AI in the job, not seniority.

Classification

Little AI. AI is not part of the work.

  1. ●●●● Builds AI80 to 100
  2. ●●●○ Works on AI60 to 79
  3. ●●○○ Uses AI40 to 59
  4. ●○○○ Little AI0 to 39

Levels come from how often the tools, models and workflows of the role are named in the posting itself. Read the description and count the AI tools, models and workflows it names.

Get new software engineering jobs by email

One email a week, each job rated for how much AI is in the work. No recruiter spam, unsubscribe in one click.

Free.

Similar roles

Software Engineering roles that involve little AI, at other companies.

What kind of AI work fits you?

Answer 12 practical questions in about three minutes. Get a simple profile, the work it points to, and live roles to explore next.

Find my next step

More jobs at EDGE Group

Related searches

Same AI level

Jobs by city