Level

SpaceX

Corrosion Control Technician

SpaceX is hiring a Corrosion Control Technician. Level rates it ; you can apply on SpaceX.

Level's read on this job

  • On Level's scale, this role is Little AI ●○○○: aI is not part of the work.
  • Tools and skills the posting cites include Air Tools, Heavy Equipment and corrosion control.
  • Level classifies it as a mid-level role.
  • Level lists 2,700+ other open roles at SpaceX.
  • The role was posted within the past week.

AI in this role

Corrosion Control Technician to apply and maintain coating systems for ground support equipment and hardware.

air-toolsheavy-equipment
corrosion-controlsandblastingindustrial-paintingquality-control

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

CORROSION CONTROL TECHNICIAN  

As a corrosion control technician for ground support equipment fabrication, you will apply and maintain coating systems that protect critical hardware and infrastructure. You will identify, remove, and treat corrosion, prepare surfaces, and apply coatings to meet strict quality standards while keeping pace with a demanding production schedule. 

RESPONSIBILITIES:  

  • Sandblast to acceptable industry standards 
  • Operate spray coating equipment to industrial and commercial standards 
  • Operate air tools, pressure feed tanks, and airless pumps 
  • Quality brush and roll industrial and commercial coatings 
  • Corrosion control on carbon steel/stainless steel using pneumatic air tools, needle guns, and scalers 
  • Safe operation of aerial platforms, forklifts, and heavy equipment  
  • Identify hazards in production and take action to reduce risk before work begins

BASIC QUALIFICATIONS:  

  • High school diploma or equivalency certificate 
  • 2+ years of corrosion control, painting, or sand blasting experience in an industrial environment  

PREFERRED SKILLS AND EXPERIENCE:  

  • 5+ years of industrial painting experience 
  • Familiarity with the National Association of Corrosion Engineers (NACE), material safety data sheet (MSDS), and Environmental Protection Agency (EPA) regulation codes or industry standards 
  • Understanding of heavy equipment safety standards 
  • Ability to follow detailed instructions 
  • Experience working at a rocket launch facility and supporting launch campaigns 
  • Self-motivated individual able to work independently or in a team environment and willing to learn 
  • Ability to assume responsibility, work with little or no supervision, be flexible, perform duties, and handle multiple tasks under potentially stressful conditions  
  • Strong attention to detail, documentation, and quality control
  • Coating types, application methods, dry film thickness measurement, holiday detection, and adhesion testing 

ADDITIONAL REQUIREMENTS:  

  • Typical hours for this position, excluding overtime, are Monday - Friday, 6:00 AM – 6:00 PM 
  • Must be available for overtime and weekends as the schedule varies depending on site operational needs; flexibility is required 
  • Valid driver’s license 
  • Must be able to work outdoors in extreme weather and perform heavy physical labor in a safe manner. Work in extreme temperatures due to weather conditions and operating equipment 
  • Must be able to work in an environment requiring exposure to fumes, odors, and noise  
  • Stand: Up to 6 hours per day 
  • Sit: Up to 6 hours per day 
  • Push/Pull: Up to 75lbs. (unassisted) 15 minutes or less per day 
  • Overhead reach: Up to 6 hours per day 
  • Walk: Up to 6 hours per day 
  • Lift/Carry: Up to ≤ 50 lbs. (unassisted) 15 minutes or less per day 
  • Climb (ladder/stairs): Up to 6 hours per day 
  • Kneel/Crouch: Up to 3 hours per day 
  • Upper body twist: Up to 3 hours per day 
  • Ability to work in temperatures over 80 degrees 6 hours or greater per day 
  • Candidate must be capable of safely working at heights (up to 500ft), in confined spaces, operating heavy equipment and machinery, and performing the physical requirements of the job listed in the job description. Candidate may be required to complete a pre-employment questionnaire and/or physical to confirm these capabilities, which may include a medical history review.

ITAR REQUIREMENTS:

  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.  

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com. 

How we rate this

Corrosion Control Technician at SpaceX rates 0 out of 100 for how much of the daily work is AI. That makes it Little AI (AI Level 1 of 4). The level is about AI in the job, not seniority.

Classification

Little AI. AI is not part of the work.

  1. ●●●● Builds AI80 to 100
  2. ●●●○ Works on AI60 to 79
  3. ●●○○ Uses AI40 to 59
  4. ●○○○ Little AI0 to 39

Levels come from how often the tools, models and workflows of the role are named in the posting itself. Read the description and count the AI tools, models and workflows it names.

Prepare for this job

Built from this posting and from similar jobs on Level.

Skills and AI tools this role asks for

Corrosion ControlSandblastingIndustrial PaintingQuality ControlAir ToolsHeavy Equipment

Questions you could be asked

  1. Tell me about a project where corrosion control was part of your work. What did you do?
  2. Tell me about a project where sandblasting was part of your work. What did you do?
  3. Tell me about a project where industrial painting was part of your work. What did you do?
  4. Tell me about a project where quality control was part of your work. What did you do?
  5. Walk me through how you've used Air Tools in your day-to-day work.

Adapt your resume

  • List these exact terms on your resume: Corrosion Control, Sandblasting, Industrial Painting, Quality Control, and Air Tools. An applicant tracking system matches the wording, not the idea.
  • Attach one line of real, concrete experience to at least one of them. A tool named with nothing behind it rarely survives a human read.

Want an expert to read your CV for this job?

Free. Send your CV and the role you want next. We reply by email within 2 to 4 business days.

Get new AI jobs by email

One email a week with the new AI jobs, each rated for how much AI is in the work. No recruiter spam, unsubscribe in one click.

Free. One email a week. Unsubscribe in one click.

Similar roles

Other roles that involve little AI, at other companies.

What kind of AI work fits you?

Answer 12 practical questions in about three minutes. Get a simple profile, the work it points to, and live roles to explore next.

Find my next step

More jobs at SpaceX

Related searches

Same AI level