Ironworker
SpaceX is hiring an Ironworker. Level rates it ; you can apply on SpaceX.
Level's read on this job
- On Level's scale, this role is Little AI ●○○○: aI is not part of the work.
- Tools and skills the posting cites include Rigging Equipment, Cranes and Torque Wrenches.
- Level classifies it as a senior role.
- Level lists 2,800+ other open roles at SpaceX.
- The role was posted within the past week.
AI in this role
Ironworker needed to erect structural steel and place rebar for on-site power generation at Starbase.
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
IRONWORKER
Starbase is standing up on-site power generation for the Starbase supercomputer. This ironworker role builds the steel the plant stands on, and the reinforcing in the foundations coming out of the ground. You will erect structural framing, pipe racks, equipment platforms, and selective catalytic reduction (SCR) stack steel, and set the embeds so trailer- and skid-mounted gas turbines, generators, piping, and emissions equipment can land on schedule.
RESPONSIBILITIES:
- Erect structural steel for power generation: turbine and generator support framing, pipe racks, equipment platforms, and SCR stack steel
- Shake out, rig, and connect columns, beams, bracing, and trusses at height; plumb and align members, then bolt up and torque connections per drawings and specs
- Install metal deck, grating, handrail, stairs, ladders, toe boards, and access steel around turbine packages, pipe racks, and stack structures
- Set embed plates, anchor bolts, and bearing surfaces so millwrights can land, level, and grout trailer- and skid-mounted turbine and generator packages
- Place and tie rebar for foundations, equipment pads, and pedestals ahead of each pour
- Read structural, erection, and placing drawings; field-fit miscellaneous iron as directed and flag drawing conflicts before steel is landed
- Rig and signal crane picks of structural members, stack sections, grating, and miscellaneous steel; keep every pick inside the lift plan
- Coordinate bolt-up, grating, and pour windows with millwrights, pipefitters, and concrete so the next craft is not waiting on steel
- Stage, move, and inventory steel, grating, rebar, hardware, and tools; keep laydown yards and work fronts orderly
- Open and close work areas: protection, debris removal, scrap segregation, and end-of-shift reset so the next crew can start immediately
- Follow fall protection, LOTO, PPE, and permit rules; do not work under a suspended load or on live systems without authorization
- Report damaged material, unsafe conditions, and drawing conflicts immediately
BASIC QUALIFICATIONS:
- High school diploma or equivalency certificate
- Completion of a recognized ironworker apprenticeship; OR 3+ years erecting structural steel or placing rebar on industrial or heavy commercial work; OR equivalent military experience
PREFERRED SKILLS AND EXPERIENCE:
- Journey-level ironworker card, NCCER Ironworker, or equivalent credential
- Experience erecting pipe racks, equipment platforms, stack or boiler steel, or other power-generation structures
- Experience setting rebar, embeds, and anchor bolts on heavy equipment foundations
- Qualified rigger and/or crane signalperson (NCCCO, NCCER, or equivalent)
- Current AWS D1.1 structural welding qualification (SMAW and/or FCAW)
- OSHA 10 or equivalent training, including steel-erection fall protection
- Ability to read structural, erection, and rebar drawings and work to a bolt and torque specification
- Prior experience on power plant, data center, industrial, or heavy-civil construction sites
- Strong safety mindset and willingness to follow fall protection, LOTO, and permit rules
- Able to keep picks and pours on schedule alongside millwrights and pipefitters
ADDITIONAL REQUIREMENTS:
- Must be able to work all shifts, overtime and/or weekends as needed
- Must be able to work at heights from structural steel, aerial lifts, and scaffolds
- Able to stand for long periods; climbing, bending, kneeling, crouching, pulling, pushing, stooping, and stretching are required
- Able to lift at least 50 lbs. unassisted
- Must be able to work outdoors in South Texas heat, wind, and rain, and around 19% aqueous ammonia SCR equipment
- Must wear required PPE, including fall protection and respiratory protection when specified
- Able to work under adverse conditions (e.g., dirty, noisy, hot, or at height)
ITAR REQUIREMENTS:
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.
How we rate this
Ironworker at SpaceX rates 0 out of 100 for how much of the daily work is AI. That makes it Little AI (AI Level 1 of 4). The level is about AI in the job, not seniority.
Little AI. AI is not part of the work.
- ●●●● Builds AI80 to 100
- ●●●○ Works on AI60 to 79
- ●●○○ Uses AI40 to 59
- ●○○○ Little AI0 to 39
Levels come from how often the tools, models and workflows of the role are named in the posting itself. Read the description and count the AI tools, models and workflows it names.
Prepare for this job
Built from this posting and from similar jobs on Level.
Skills and AI tools this role asks for
Questions you could be asked
- Tell me about a project where structural steel was part of your work. What did you do?
- Tell me about a project where ironworking was part of your work. What did you do?
- Tell me about a project where rebar placement was part of your work. What did you do?
- Tell me about a project where rigging was part of your work. What did you do?
- Tell me about a project where welding support was part of your work. What did you do?
Adapt your resume
- List these exact terms on your resume: Structural Steel, Ironworking, Rebar Placement, Rigging, and Welding Support. An applicant tracking system matches the wording, not the idea.
- Attach one line of real, concrete experience to at least one of them. A tool named with nothing behind it rarely survives a human read.
Get your CV reviewed before you apply
Send your CV and the role you want next. Your review arrives by email within 3 days.
Get new AI jobs by email
One email a week, each job rated for how much AI is in the work. No recruiter spam, unsubscribe in one click.
Free.
Similar roles
Other roles that involve little AI, at other companies.
What kind of AI work fits you?
Answer 12 practical questions in about three minutes. Get a simple profile, the work it points to, and live roles to explore next.
Find my next step